FIXING your Damaged JAF BOX! No need LPT CABLE and Cut!

GSM wars! A useless war that nobody really wins! Only LOSERS! And the looser are US! the end users.

You will know if your box is in trouble if you encountered such (Unknown field ID! Error sync the phone or can't detect your phones during check process.)

All you need is some wires if you don't have an LPT cable. Just solder the wires directly in the board.

see illustration:

 This is mine:

After soldering some wires, do the software part to fix your damaged box. Insert wires in your LPT port of the PC and put USB cable on your Jaf box to power it with 5V and ground. 
Download the Software here. 

After installing the needed software, Open your Pony Prog and configure this step below:

This is the video guide for software, thanks to the up loader and the maker of this tutorial. 
http://www.youtube.com/watch?v=uF8HrXt3i1Y

Some Screenshots while writing the box.

After some writing process desolder all wires and assemble your box, then UPDATE its Firmware!

Your Done!
Test for Booting:

Every updates that come from any Product, never Installed it First, Wait for others to FEEDBACK! Or you will waste time and money in fixing such damaged box!

You can post comments if you find any problem.

GOODLIGHT for a GOODLIFE